CAD-CUT® Premium Plus Sublistop

POLYURETHANE FLEX MATERIAL WITH A SLIGHTLY ADHESIVE CARRIER.

The material has a layer of sublistop to prevent any sublimation of the polyester colour. The film is easy to weed, and is suitable for several print proofs

CAD-CUT Premium Plus Sublistop

Available In
50 cm x 25 m rolls

Recommended Fabrics
100% cotton
100% polyester
Poly/cotton blends
Lycra®/ Spandex blends
Polyester knits
Polyester mesh
Poly/foam&cotton caps
Satin

Cutting Notes
You should always test cut prior to any production run. Remember cutter settings will need to be adjusted as your blade ages. For optimal cutting and weeding, maintain a line thickness of at least 1.5mm (1/16“) for lettering & logos.

Application Instruction
Temp: 140°C
Time: 8 seconds
Pressure: Medium (#4-6 on Hotronix®)
Peel: Warm

Multi-Colour Designs
Apply background for 3-5 seconds, peel carrier cool. Repeat for additional colors. Finish with final Application of 18-20 seconds. Peel cool.

Care Instructions
Machine wash up to 40°C using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry-clean.

Storage
Store in a cool, dry area. Avoid direct heat, sunlight and humidity.

Accessories Required
Craft Paper or reusable Cover Sheet, EZ Weeder®

Your Name (required)

Your Email (required)

Subject

Your Message