CAD-CUT® Silicone 3D-500

CAD-CUT Silicone 3D-200” is 200 microns thick, and is ideal for medium to large cutting details. Because of its blocking ability, it is ideal for prints onto sublimated polyester.

The CAD-CUT Silicone 3D-500 is 500 microns thick, and is a durable, silicone material with a matte finish, and soft touch. This unique 3D look enhances any fashion wear.

CAD-CUT Silicone 3D-500

Available In
50 cm x 25 m rolls

Recommended Fabrics
100% cotton
100% polyester*
Poly/cotton blends

Cutting Notes

You should always test cut prior to any production run. Remember cutter settings will need to be adjusted as your blade ages. For optimal cutting and weeding, maintain a line thickness of at least 1.5mm (1/8“) for lettering & logos.

Application Instruction
Temp: 150°C
Time: 10 seconds
Pressure: Medium (#4-6 on Hotronix®)
Peel: cold
Reprint: 05 Seconds

Multi-Color Designs
CAD-CUT® Silicone 3D -500- is not recommended for multilayered applications.

Care Instructions
Machine wash up to 60°C using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry-clean. Can be directly ironed onto.

Storage
Store in a cool, dry area. Avoid direct heat, sunlight and humidity.

Accessories Required
Craft Paper or reusable Cover Sheet, EZ Weeder®

Your Name (required)

Your Email (required)

Subject

Your Message