SkyScreen All Purpose Ink Wash – Hard on inks and emulsion hazes, soft on stencil and mesh
Skyscreen All Purpose Ink Wash is one revolutionary product. It has ink intelligence – it attacks just the inks, leaving the design on the stencil as if it is being used for the first time. This ink remover removes even the most stubborn of inks, including plastisols, vinyl, and water-based inks, and enamel hazes. The ink remover leaves no trace of any screen fillers, making the screen ready for emulsion removal. To top it all, SkyScreen All Purpose Ink Wash can be used as an activator for ghost and haze removers.
How to Remove Ink with SkyScreen All Purpose Ink Wash1
APPLY ALL PURPOSE INK WASH Remove as much ink as possible with a scraper. Soak a work rag with SkyScreen All Purpose Ink Wash and rub it on both sides of the screen until the remaining ink is dissolved and can be wiped from the stencil.2
RINSE ALL PURPOSE INK WASH AND DISSOLVED INK FROM THE SCREEN Rinse the screen thoroughly with water. If any ink remains, apply additional All Purpose Ink Wash to the screen and brush it every minute or two until the ink is dissolved. Remove the ink residue with a work rag and rinse the screen thoroughly with water.
Health and Safety Information
Rinse any residue of SkyScreen All Purpose Ink Wash from the screen with water or Citrus Screen Opener, as SkyScreen All Purpose Ink Wash has a high flash point and can attack frame adhesives if dwell time is excessive.