Your Name (required)

Your Email (required)


Your Message

Ulano Platinum – Textile Emulsion

Platinum is a ready-to-use

SBQ-photopolymer direct emulsion for imprinted sportswear printing with plastisols, including aggressive post-phthalates. With anti-halation chemistry, Platinum can be used with less costly white mesh without the closing-up of fine lines and details. With the addition of its optional diazo, Platinum resists water-based and discharge inks. Its high viscosity (12,000 – 14,000 centipoise at 25º C.) provides good coating control, even on coarse mesh. Its high solids content (≈ 42 %) facilitates fast drying, good buildup of EOM (emulsion thickness over mesh) per coating stroke and, thus, good printed edge definition. Platinum is formulated for compatibility with CTS (computer-toscreen) exposure, and automated washout and reclaiming equipment. Used with plastisols, it does not require any sensitizers or additives; it is presensitized and premixed. Platinum’s grey color, provides high color contrast for easy stencil inspection.

► Anti-halation formulation
√ Costly dyed mesh is unnecessary to hold fine lines and details
► Ultra-fast exposing
√ Suitable for CTS exposure systems
√ Good wet strength, exposure latitude, and durability
► High (≈ 42%) solids content
√ Fast drying
√ Better mesh bridging for good printed edge definition
► Easy wash-out
√ Fast stencil through-put for high volume shops
√ Suitable for automatic washout units
► High humidity resistance
√ High durability, even during the summer season
► Excellent solvent resistance
√ Resists aggressive post-phthalate plastisols and most wash-up solvents
►Easy reclaim
√ Can be used in automatic reclaiming systems
√ Resists water-based and discharge inks if used with optional diazo