Ulano’s Stencil Remover Paste No. 5


Removes most stubborn of emulsions without etching the mesh

Finally an answer to most screen printers’ question, “How do you reclaim stencils without abrading mesh surface or impacting stencil tension?”

Simple, try using Ulano’s Stencil Removar Paste No. 5. Ready-to-use, odor-free, and environment friendly, this revolutionary product has highest concentration of active ingredients making it the best screen recovery system in the market. Its thick consistency ensures reclaiming even the largest of stencils is a breeze.

For fast and thorough removal of direct emulsions, capillary films, and direct or indirect synthetic films from all mesh types, including metalized polyester. That’s not all, folks. Ulano’s Stencil Remover Paste No. 5 contains no alkalis or hypochlorites, which means it will not attack the adhesives on stretch-and-glue frames.

4 Hard-to-Miss Product Benefits of Ulano’s Stencil Remover Paste No. 5

  • Economical
    – Thick consistency ensures there is no waste running down the drain.
  • Fast Action
    – In less than 5 minutes, reclaim your stencil.
  • Eco-friendly
    – Non hazardous, safe, can be used even in unventilated rooms.5 U.S. Gallon (18.925 lt.)
  • Broad spectrum
    – No matter the mesh type, guaranteed removal of emulsions, direct or indirect films.

Reclaiming Stencils in 4 Simple Steps

  1. Follow these simple steps to ensure your stencils have a longer shelf life. Remove the ink from the stencil with a proper solvent.
  2. Degrease the stencil with a good degreaser to remove solvent residues. A degreaser also speeds up the action of the stencil remover. Rinse thoroughly with a high pressure washer gun.
  3. Use a screen cleaning brush to apply Ulano’s Stencil Remover Paste No. 5 on the mesh on both sides.
  4. Wait no longer than five minutes else the stencil remover shall dry on the screen. Wash away the stencil with power spray of water.

Note:Make sure that Ulano’s Stencil Remover Paste No. 5 never freezes. Freezing and thawing will turn the paste into a liquid. This, however, has no effect on the performance of the stencil remover.

This is one of the most effective and eco-friendly chemicals to grace the world of screen printing, supplied by Ulano – a brand that is trusted world wide. SkyScreen is proud to have an alliance with such brands that offer the best in the field of screen printing products.

For all your professional screen printing materials, equipment, chemicals and products, look no further thank SkyScreen’s portfolio of nothing but the best products and offerings.

Health and Safety Information

Ulano’s Stencil Remover Paste No. 5 is a strong oxidant. It can cause skin irritation; always use gloves. Keep the container closed tightly. Clean spills immediately.

First Aid Tip! In case of contact with the eyes or skin, flush immediately with water. If irritation persists, contact a physician.

Ulano’s Stencil Remover Paste No. 5 is available in:

  • Quart (946 ml.)
  • U.S. Gallon (3.785 lt.)
  • 5 U.S. Gallon (18.925 lt.)
  • 50 U.S. Gallon Drum (18.925 lt.)

    Need Help? Chat with us